- Save filter
- Load filter
- e-mail on update
SUPPLIERS DECLARATION OF CONFORMITY for Material Declaration Management, Siemens SIMATIC 2022-04 IMO Material Declaration SIMATIC
Send your questions to one of the e-mail addresses listed below.
6AG1 SIPLUS extreme: UL/ULhaz approbations
Conversion of Siemens standard order number to Siemens SIPLUS extreme order number is available in the Conversion Tool updated monthly. ...
According to the UL/FM/ATEX approvals it is necessary to adapt the temperature class of SIPLUS extreme to the temperature class of BasedOn in order to extend the field of application compared to BasedOn and enable a 1:1 exchange.
6AG1 SIPLUS extreme: 100% relative humidity (RH) and bedewing are permissible
You have a SIPLUS extreme module for extreme environmental conditions with article no. (6AG1 ...) and you want to configure this with STEP 7. For this you use the type based on this module with article no. (6ES7 ...) .
6AG1 SIPLUS extreme: Permissible usage or usage location.
Effective immediately, both SIPLUS TP 177B models from the SIPLUS extreme product range are available for applications subject to more severe loads and stresses. ...