The document below informs you how to transfer a WinCC (TIA Portal) configuration to an operator panel using Ethernet.
1.Transfer from a Configuration Computer with Windows 7 using Ethernet
1.2 Settings on the Operator Panel
1.3 Settings on the Configuration Computer
1.4 Checking the Ethernet Connection
1.4.1 Checking the Connection to the Panel
1.4.2 Checking the Settings on the Operator Panel
1.5 Settings in WinCC (TIA Portal)
WinCC_TIA_Portal_Ethernet_Transfer_en.pdf ( 802 KB )
Note on security
The functions and solutions described in this article confine themselves predominantly to the realization of the automation task. Furthermore, please take into account that corresponding protective measures have to be taken in the context of Industrial Security when connecting your equipment to other parts of the plant, the enterprise network or the internet. More information can be found in Entry ID: 50203404.
Discuss this FAQ
Do you have another solution or a different application?
Is this solution not the right one for you?
Discuss this FAQ here!
Download, Transfer, Load, Control Panel, Channel, Remote Control, Commissioning, Project transfer, Bus address, Transmission rate, Nodes, Stations