For the messages select the option
Reported, so that messages can be reported on a
By default the following settings are displayed in WinCC
flexible ES after calling the discrete alarms via Project Tree
> Operator Panel > Alarm Management > Discrete
- Trigger Tag
- Trigger bit
Fig. 1: Default settings for discrete alarms
You have two options for selecting the Reported
The following setting refers to discrete messages. The setting for
analog messages is identical.
In the parameters of the discrete alarm concerned you can select
the Report option via
Properties > Process.
Fig. 2: Report setting in discrete alarms
In the table view right-click the "gray
header". A new window opens in which you can select the
Fig. 3: Selection window
Once you have selected the "Reported" option, the new option is
displayed in the "header". Now you can assign the option
Reported Off/On to each message.
Fig. 4: Message reporting