Siemens Industry Online Support - Automation Service, Automation Support, Simatic Service, Simatic Support, Technical Support, Technical Consulting

S7-400 CPU 41x -- Configuring and programming communication -- Using communication blocks

	What is the difference between the initialization and runtime parameters on the blocks for Modbus TCP?
	Why is the status value A090 (hex) output for Modbus TCP although you have entered the correct license?
	What are the differences between the licensed version and the downloadable demo version of the blocks for Modbus TCP?
	Why is the value A083 (hex) output permanently at the STATUS output parameter of the block for Modbus TCP when the ENQ_ENR=true input parameter has been set?
	Which blocks for Modbus TCP can you rename or re-wire when the block numbers of the Mode blocks are already being used in the user program?
	How can you read out diagnostics data from a SIRIUS 3RK3 modular safety system using a S7-300/400 CPU?
	Which communication options are there in SIMATIC S7?
	How does data communication work between S7-300/S7- 400 and S7-200 via MPI using S7 basic communication?
	Consistent data in S7-400, summary of mechanisms
	Which ports are released for Modbus/TCP communication and how many Modbus clients can communicate with a SIMATIC S7 CPU as Modbus server?
	How do you implement chronological messaging with S7-400 CPUs and WinCC?
	How do you configure a specified and an unspecified S7 connection for data exchange between S7-300 and/or S7-400 by way of Industrial Ethernet CPs?
	How can you establish OPEN MODBUS / TCP communication from a SIMATIC S7 and where can you find further information?
	How do you use WinCC flexible to transfer a project to an operator panel via S7 routing?
	What restrictions are there for active jobs when communicating with SFC 58 / SFC 59 and SFB 52 / SFB 53 via PROFIBUS DP and PROFINET IO?
	How do you program the communication blocks FB63 "TSEND", FB64 "TRECV", FB65 "TCON" and FB66 "TDISCON" in order to use the ISO-on-TCP protocol for data exchange by way of the integrated PROFINET interface of a CPU or by way of the CP443-1 Advanced?
	How do you program the communication blocks FB63 "TSEND", FB64 "TRCV", FB65 "TCON" and FB66 "TDISCON" in order to use the TCP protocol for data exchange by means of the integrated PROFINET interface of an S7-300 or S7-400 CPU?
	How do you program the communication blocks FB67 "TUSEND", FB68 "TURCV", FB65 "TCON" and FB66 "TDISCON" in order to use the UDP protocol for data exchange by means of the integrated PROFINET interface of a CPU?
	How can you access consistent data without SFC14/15 as part of the process image?
	How great is data consistency in the PUT and GET S7 communication functions for the individual S7-400 CPUs?

S7-200 Communication interface modules -- Configuring and programming communication -- Using PROFIBUS protocols and services

	Which communication options are there in SIMATIC S7?
	How do you configure an S7-200 connection via PROFIBUS DP?
	How can you communicate data between the S7-200 and the S7-300 via PROFIBUS DP?

Which communication options are there in SIMATIC S7?

Part number:

Description
The compendium entitled "Communication with Automation Systems, Planning - Configuring - Referencing" was created for the topic of "Communication in Automation Technology". Taking communication technologies frequently used in automation technology, we have taken a closer look at their properties.

The compendium is available for downloading in Entry ID 20982954.

Keywords
Bus systems, Connection, Protocols, Bus medium

Entry ID:19124657

Date:2010-04-14

I regard this article....

as helpful

as not helpful

Copy link

Suggestion for the entry

Send to a friend